Serial GPS Receiver BC-GPSK
The BC-GPSK is a serial GPS receiver that provides NMEA 0183 standard output for your scanner, APRS, Marine Radio, or other application that calls for an industry standard GPS output.
- Provides a simple solution for GPS connection to location-based scanning capable scanner.
- For Scanners and Marine Products
- Replaced by BC-SGPS
- BCD996T
- BCT15
- BC346XT/XTC
- BCD396XT
- BCD996XT
- BCT15X
- BR330T
- BCD436HP
- BCD536HP
- HomePatrol-1
- HomePatrol-2
- BCD996P2
- BCD325P2 (with additional cable adapter)
| GPS Chipset | SiRF Star III e/LP |
| Horizontal Position Accuracy |
5m 2D RMS WAAS received 10m 2D RMS WAAS not received |
| Velocity Accuracy |
0.1m/sec 65% (SA off) |
| Time Accuracy |
1 micro-second synchronized to GPS time |
| Datum |
WGS-84 |
| Hot Start |
1 second, average (with ephemeris and almanac valid) |
| Warm Start |
38 seconds, average (with almanac but not ephemeris) |
| Cold Start |
42 seconds, average (neither almanac nor ephemeris) |
| Reacquisition |
0 .1 seconds, average (interruption recovery time) |
| GPS Protocol |
NMEA0183 |
| GPS Output Data |
NMEA 0183 V2.2 protocol, and supports command: GGA, |
| GPS transfer rate |
Software command setting (Default: 4800,n,8,1 for NMEA) |
| Acceleration Limit |
Less than 4g |
| Altitude Limit |
18,000 meters (60,000 feet) max. |
| Velocity Limit |
515 meters/sec. (1,000 knots) max. |
| Jerk Limit |
20 m/sec**3 |
| Operating Temperature |
-40°~ 185°F (-40°~ 85°C) |
| Storage Temperature |
-40°~ 185°F (-40°~ 85°C) |
| Humidity |
Up to 95% non-condensing |
| Voltage |
13.8V DC Input nominal) |
| Current |
42 mA typical |
BC-GPSK Owner's Manual
WARNING: This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
